JSD signal isolation transmitter used in environmental protection industry

Jie Sheng Da Technology Active isolation transmitter used in environmental protection industry

Jie Sheng Da Technology analog signal isolation transmitter is widely used in environmental protection cause of all mankind, "Jie Sheng Man" for all mankind to do their environmental responsibility and a heart to support the cause of environmental protection concerns all of humanity should continue to work together efforts, "McNair Sheng Man" will continue its efforts continue to focus on environmental protection cause of all mankind, for the environmental cause of human building blocks.

Jie Sheng Da Technology isolation transmitter is the flow sensors, pressure sensors, wind sensors and other sensors output standard signal (eg 4-20mA/0-20mA/0-10V/0-5V/1-5V convert acquisition systems, control systems and PC control system interface analog signals that can be matched.

Applied to all kinds of environmental protection industry isolated transmitter product has the following characteristics:
(A) an inlet a (single input single output/single input single output) Analog signal isolation transmitter (magnetic electrically isolated series)

Product Features:
◆ Small size, low cost, standard rail mounting DIN35mm
◆ three-port isolation (input, output, operating supply isolated from each other)
◆ High level (0.1% F.S, 0.2% F.S)
◆ High linearity (0.1% F.S)
◆ High isolation voltage (2500VDC/60S)
◆ Very low temperature drift (35PPM / ℃)
◆ Industrial temperature range (-45 ~ +85 ℃)
◆ products are reliable (MTBF> 50 Wan hour)
◆ Power supply (5VDC/12VDC/15VDC/24VDC single power supply, and other options)
◆ international standard signal (0~5V/0 ~ 10V / 0 ~ ± 10V / 4 ~ 20mA / 0 ~ ± 20mA, etc. Multiple choice)

Product Overview:
Shenzhen Jie Sheng Da Technology (JSD Technology) DIN35 1x1 MI active single-precision analog signal isolation transmitter is electrically insulated between input and output analog signal conversion, amplification, isolation, signal conditioning, receiver a variety of field instrumentation analog signal input through the analog signal isolation transmitter signal conversion conditioning to standard analog signal in the form of special or user-specified analog signal is transmitted to the control room, PLC, PC and DCS systems . To the input, output, working power of mutual isolation, industrial monitoring and control in power isolation test site, power monitoring, medical electronic equipment, analog signal isolation and gathering so widely used. The analog signal isolation transmitter using electromagnetic isolation technology, compared to the optocoupler signal isolation transmitter has better output accuracy, temperature drift characteristics of small and good linearity characteristics.

Application:
◆ DC current / voltage signal isolation, conversion and amplification
◆ industrial field signal isolation and long distance transmission without distortion
◆ analog signal ground interference suppression and analog isolation, collecting
◆ 4 ~ 20mA / 0 ~ 20mA / 0 ~ 5V / 0 ~ 10V sensor signal isolation and conversion function
◆ instrumentation and sensor signal transceiver
◆ power isolation and control of industrial site
◆ power monitoring, medical equipment isolation barrier
Technical data: http://www.jsd-iae.com/down/20127903535427.pdf

(2) one into a (single input single output / single input single output) Analog signal isolation transmitter (opto-isolated series)
 Features:
● thin volume, low-cost international standards DIN35mm rail mounting
● three-port isolation (input, output, operating supply isolated from each other)
● High accuracy (0.1% F.S, 0.2% F.S)
● Full scale range (<0.2% F.S)
● High isolation voltage (2500VDC/60S)
● Very low temperature drift (100PPM / ℃)
● industrial temperature range (-45 ~ +85 ℃)
● product performance and reliable (MTBF> 50 Wan hour)
● Operating power supply (5VDC/12VDC/15VDC/24VDC multiple options)
● International standard signal selection (0 ~ 5V / 0 ~ 10V / 1 ~ 5V / 4 ~ 20mA multiple choice)

Application:
● DC current / voltage signal isolation, conversion and amplification
● industrial field signal isolation and long distance transmission without distortion
● Analog signal ground interference suppression and analog isolation, acquisition, conversion, and remote
● 4 ~ 20mA / 0 ~ 20mA / 0 ~ 5V / 0 ~ 10V sensor signal isolation, transformation and remote
● instrumentation and sensor signal transceiver
● power isolation monitoring industrial site
● power monitoring, medical equipment isolation barrier
● overcome interference between instrumentation equipment
 Single entry / double out analog voltage (current) signal isolation transmitter unidirectional

Product Overview:
Shenzhen Jie Sheng Technology (JSD Technology) DIN35 1x1 OI active single input single output analog unidirectional signal isolation transmitter is electrically insulated between input and output analog signal conversion, amplification, isolation signal conditioning, receiving a variety of field instrumentation analog signal input through the analog signal isolation transmitter signal conversion conditioning, using a standard analog signals in the form of special or user-specified analog signal is transmitted to the control room, PLC , PC and DCS systems. To the input, output, working power of mutual isolation, quarantine measures not only make use of new input and output, the power supply isolation, but also so that the product of the mutual isolation between channels, isolation voltage up to 2500VDC, monitoring and control of the product in power isolation industrial measurement field, power monitoring, medical electronic equipment, analog signal isolation and gathering so widely used. The analog signal isolation transmitter using the new optocoupler isolation technology, than the magnetic isolation transmitter has a stronger anti-EMC electromagnetic interference characteristics, free gain and zero adjustment, temperature drift characteristics of small and good linearity, suitable for use in vibration, damp industrial field, the international standard DIN35mm rail mounting, user-friendly installation and so on.
More detailed technical information contact Jie Sheng Technology Co., Ltd. Tel 0755 -28,099,259 Sales

 (3) one into two (single-entry double outlet / single input dual channel output) Analog signal isolation transmitter (magnetic electrically isolated series)
 Product Features:
◆ thin volume, low-cost international standards DIN35mm rail mounting
◆ three-port isolation (input, output, and the supply of mutual isolation)
◆ Single input dual-output, mutual isolation between channels
◆ The product has a signal distribution function (one input, two outputs simultaneously)
◆ High level (0.1% F.S)
◆ High linearity (0.1% F.S)
◆ High isolation voltage (2500VDC/60S)
◆ Very low temperature drift (35PPM / ℃)
◆ Industrial temperature range (-45 ~ +85 ℃)
◆ products are reliable (MTBF> 50 Wan hour)
◆ Power supply (5VDC/12VDC/15VDC/24VDC single power supply, and other options)
◆ international standard signal input and output (0 ~ 5V / 0 ~ 10V / 1 ~ 5V / 4 ~ 20mA / 0 ~ 20mA / 0 ~ ± 5V / 0 ~ ± 10V / 0 ~ ± 10mA / 0 ~ ± 100mV / 0 ~ ± 20mA, etc. Multiple choice)

Product Overview:
     Shenzhen Jie Sheng Da Technology (JSD Technology) DIN35 1x2 MI active single-input dual-output high-precision analog signal isolation transmitter is electrically insulated between input and output analog signal conversion, amplification, signal isolation conditioners, receiving a variety of field instrumentation analog signal input through the analog signal isolation transmitter signal conversion conditioning, using a standard analog signals in the form of special or user-specified analog signal is transmitted to the control room, PLC, PC and DCS system. To the input, output, working power of mutual isolation, quarantine measures not only make use of new input and output, the power supply isolation, but also so that the product of the mutual isolation between channels, isolation voltage up to 2500VDC, monitoring and control of the product in power isolation industrial measurement field, power monitoring, medical electronic equipment, analog signal isolation and gathering so widely used. The analog signal isolation transmitter using electromagnetic isolation technology, compared to the optocoupler signal isolation transmitter has better output accuracy, temperature drift characteristics of small and good linearity, with signal distribution function and suitable for use in vibration, damp industrial scene, standard DIN35mm rail mounting, user-friendly installation and so on.

Application:
◆ DC current / voltage signal isolation, conversion and amplification
◆ industrial field signal isolation and long distance transmission without distortion
◆ analog signal ground interference suppression and analog isolation, collecting
◆ 4 ~ 20mA / 0 ~ 20mA / 0 ~ 5V / 0 ~ 10V sensor signal isolation and conversion, and can achieve a forward two, into three, two into two, three into three isolated signal functions.
◆ instrumentation and sensor signal transceiver
◆ power isolation and control of industrial site
◆ power monitoring, medical equipment isolation barrier
Technical details: http://www.jsd-iae.com/down/20127111114274.pdf

(4) one into two (single-entry double outlet / single input dual channel output) Analog signal isolation transmitter (opto-isolated series)

Features:
● thin volume, low-cost international standards DIN35mm rail mounting
● four-terminal isolation (input, output, power supply and mutual isolation between channels)
● High accuracy (0.1% F.S, 0.2% F.S)
● Full scale range (<0.2% F.S)
● High isolation voltage (2500VDC/60S)
● Very low temperature drift (100PPM / ℃)
● industrial temperature range (-45 ~ +85 ℃)
● product performance and reliable (MTBF> 50 Wan hour)
● Operating power supply (5VDC/12VDC/15VDC/24VDC multiple options)
● International standard signal selection (0 ~ 5V / 0 ~ 10V / 1 ~ 5V / 4 ~ 20mA multiple choice)
Application:
● DC current / voltage signal isolation, conversion and amplification
● industrial field signal isolation and long distance transmission without distortion
● Analog signal ground interference suppression and analog isolation, acquisition, conversion, and remote
● 4 ~ 20mA / 0 ~ 20mA / 0 ~ 5V / 0 ~ 10V sensor signal isolation, transformation and remote
● instrumentation and sensor signal transceiver
● power isolation monitoring industrial site
● power monitoring, medical equipment isolation barrier
● overcome interference between instrumentation equipment
● Single entry / double out analog voltage (current) signal isolation transmitter unidirectional

Product Overview:
Shenzhen Jie Sheng Technology (JSD Technology) of DIN35 1x2 OI active single-input dual-channel analog output unidirectional signal isolation transmitter is electrically insulated between input and output analog signal conversion, amplification, isolation The signal conditioner, receiving a variety of field instrumentation analog signal input through the analog signal isolation transmitter signal conversion conditioning, using a standard analog signals in the form of special or user-specified analog signal is transmitted to the control room, PLC, PC and DCS systems. To the input, output, working power of mutual isolation, quarantine measures not only make use of new input and output, the power supply isolation, but also so that the product of the mutual isolation between channels, isolation voltage up to 2500VDC, monitoring and control of the product in power isolation industrial measurement field, power monitoring, medical electronic equipment, analog signal isolation and gathering so widely used. The analog signal isolation transmitter using the new optocoupler isolation technology, than the magnetic isolation transmitter has a stronger anti-EMC electromagnetic interference characteristics, free gain and zero adjustment, temperature drift characteristics of small and good linearity, suitable for use in vibration, damp industrial field, the international standard DIN35mm rail mounting, user-friendly installation and so on.
Technical data: http://www.jsd-iae.com/down/20127111114274.pdf

 (5) one into three (single-entry three / single input and three-channel output) Analog signal isolation transmitter (opto-isolated series)
Product Features:
● thin volume, low-cost international standards DIN35mm rail mounting
● three-port isolation (input, output, and the supply of mutual isolation)
● Single-channel input and three output channels, mutual isolation between channels
● Accuracy class (0.1% F.S; 0.2% F.S)
● Full scale range (0.2% F.S)
● High isolation voltage (2500VDC/60S)
● Temperature Drift (100PPM / ℃)
● industrial temperature range (-45 ~ +85 ℃)
● product performance and reliable (MTBF> 50 Wan hour)
● Power Supply (5VDC/12VDC/15VDC/24VDC single power supply, and other options)
● International standard signal input and output (0~5V/0~10V/1~5V/4~20mA/0~20mA, etc. Multiple choice)

Product Overview:
     Shenzhen Jie Sheng Da Technology (JSD Technology) of DIN35 1x3 OI series active single-input single three-channel analog output signal isolation transmitter is electrically insulated between input and output analog signal conversion, amplification, isolation The signal conditioner, receiving a variety of field instrumentation analog signal input through the analog signal isolation transmitter signal conversion conditioning, using a standard analog signals in the form of special or user-specified analog signal is transmitted to the control room, PLC, PC and DCS systems. To the input, output, working power of mutual isolation, quarantine measures not only make use of new input and output, the power supply isolation, but also so that the product of the mutual isolation between channels, isolation voltage up to 2500VDC, monitoring and control of the product in power isolation industrial measurement field, power monitoring, medical electronic equipment, analog signal isolation and gathering so widely used. The analog signal isolation transmitter using the new optocoupler isolation technology, than the magnetic isolation transmitter has a stronger anti-EMC electromagnetic interference characteristics, free gain and zero adjustment, temperature drift characteristics of small and good linearity, suitable for use in vibration, damp industrial field, the international standard DIN35mm rail mounting, user-friendly installation features point.
Technical details: http://www.jsd-iae.com/down/20127111532251.pdf

 (6) one into three (single-entry three / single input and three-channel output) Analog signal isolation transmitter (magnetic electrically isolated series)
Product Features:
◆ thin volume, low-cost international standards DIN35mm rail mounting
◆ three-port isolation (input, output, and the supply of mutual isolation)
◆ single input and three output channels, mutual isolation between channels
◆ The product has a signal distribution function (one input simultaneously three outputs)
◆ High level (0.1%, 0.2% F.S)
◆ High linearity (0.1% F.S)
◆ High isolation voltage (2500VDC/60S)
◆ Very low temperature drift (35PPM / ℃)
◆ Industrial temperature range (-45 ~ +85 ℃)
◆ products are reliable (MTBF> 50 Wan hour)
◆ Power supply (5VDC/12VDC/15VDC/24VDC single power supply, and other options)
◆ international standard signal input and output (0 ~ 5V / 0 ~ 10V / 1 ~ 5V / 4 ~ 20mA / 0 ~ 20mA / 0 ~ ± 5V / 0 ~ ± 10V / 0 ~ ± 10mA / 0 ~ ± 100mV / 0 ~ ± 20mA, etc. Multiple choice)
 Product Overview:
     Shenzhen Jie Sheng Da Technology (JSD Technology) DIN35 1X3 MI active single-input dual-output high-precision analog signal isolation transmitter is electrically insulated between input and output analog signal conversion, amplification, signal isolation conditioners, receiving a variety of field instrumentation analog signal input through the analog signal isolation transmitter signal conversion conditioning, using a standard analog signals in the form of special or user-specified analog signal is transmitted to the control room, PLC, PC and DCS system. To the input, output, working power of mutual isolation, quarantine measures not only make use of new input and output, the power supply isolation, but also so that the product of the mutual isolation between channels, isolation voltage up to 2500VDC, monitoring and control of the product in power isolation industrial measurement field, power monitoring, medical electronic equipment, analog signal isolation and gathering so widely used. The analog signal isolation transmitter using electromagnetic isolation technology, compared to the optocoupler signal isolation transmitter has better output accuracy, temperature drift characteristics of small and good linearity, with signal distribution function and suitable for use in vibration, damp industrial scene, standard DIN35mm rail mounting, user-friendly installation and so on.
Application:
◆ DC current/voltage signal isolation, conversion and amplification
◆ industrial field signal isolation and long distance transmission without distortion
◆ analog signal ground interference suppression and analog isolation, collecting
◆ 4~20mA/0~20mA/0~5V/0~10V sensor signal isolation and conversion, and can achieve a forward two, into three, two into two, three into three isolated signal functions.
◆ instrumentation and sensor signal transceiver
◆ power isolation and control of industrial site
◆ power monitoring, medical equipment isolation barrier
Technical details: http://www.jsd-iae.com/down/201278233925608.pdf

Signal isolation transmitter selection illustration:
           

Selection parameter table:

Selection example:
Example 1: Input channel 1:4-20mA; Output Channel 1:4-20mA; Output Channel 2:4-20mA; Output Channel 3:4-20mA;
Power supply: 24VDC; Product Type: DIN35 1x3 OI-I4-P1-IO1

Example 2: Input channel 1:0-10VDC; Output Channel 1:0-5VDC; Output Channel 2:0-5VDC; Output Channel 3:0-5VDC;
Power supply: 12VDC; Product Type: DIN35 1x3 OI-V2-P3-VO4

Signal isolation transmitter physical map: