Jie ShengDa Technology launched one in one out resistance signal displacement isolation transmitter

2013-3-6 12:41:03  clicks:2503

         Jie ShengDa Technology launched one in one out  resistance signal displacement isolation transmitter

GENERAL DESCRIPTION:
JIE Sheng Technology DIN35 1x1 OI-RPV (I) Ox Series linear Electronic scale/ Resistance signal (Displacement signal) Isolation transmitter is an analog signal isolation transmitter, which is used to collect, isolate, amplify and convert the analog signal from resistance, linear electronic scale, angular displacement sensor input, it can receive a variety of analog signal from the field instrument, and transmit a standard output signal or user-specified special signal to the control room、 PLC、PC or DCS. The product is isolated between power supply, input and output , the isolated voltage is up to 3000VDC , The isolation transmitter input voltage constant drive for three-wire sensor devices and instrumentation, it is widely used in potentiometer signal isolation, acquisition and transformation; industrial field precision displacement, angle measurement; electronic signals into standard analog signal; It is widely used in the displacement, angle measurement and alarm; industrial field signal isolation and remote transmission, analog signal ground interference suppression, industrial measurement systems, medical electronic equipment, electrical equipment etc. Adopting high efficiency Optocoupler isolation technology to achieve signal isolation, it is available to keep high output accuracy, good linearity and low temperature drift.

Features:
◆ Small size, low cost, international standards DIN35mm rail mounting
◆ three-port isolation (input, output, operating supply)
◆ High accuracy (0.1% F.S, 0.2% F.S)
◆ High linearity (0.1% F.S)
◆ High isolation voltage (2500VDC/60S)
◆ Low temperature drift (35PPM / ℃)
◆ Wide Industrial class operation temperature (-45 ~ +85 ℃)
◆ High reliability (MTBF> 50 Wan hour)
◆ Power supply (5VDC/12VDC/15VDC/24VDC single power supply options)
◆ Resistor or potentiometer signal input(0~50Ω/0~100Ω/0~200Ω/0~500Ω/0~1KΩ/0~2KΩ/0~5KΩ/0~10KΩ, etc.)
◆ international standard signal output: 0~5V /0~10V/ 0~±5V/ 0~±10V/ 4~20mA/ 0~20mA /0~10mA ,etc.

Copyright © jsd-iae.com Shenzhen JSD Technology Co., Ltd. All Rights Reserved.  Tel:86-0755-28099259 
在线客服