Jie Sheng Technology launched input distribution isolation transmitter

          Jie Sheng Technology launched input  distribution isolation transmitter

     Jie Sheng Da Technology (JSD Technology ) DIN35 1x1 MI-2S one input one output distribution isolation transmitter is a signal conditioner with electrical insulation between input and output, it can receive a variety of two-wire miter analog signal from the field instrument and provide a standard 24VDC power to transmitter device ,transmit a standard two-wire output signal or user-specified special signal to the control room、 PLC、PC or DCS. The product is isolated between power supply, input and output , the isolated voltage is up to 3000VDC .It is widely used in the industrial measurement systems, medical electronic equipment, electrical equipment etc. Adopting high efficiency electromagnetism isolation technology to achieve signal isolation, it is available to keep high output accuracy, good linearity and low temperature drift.

Features :
● Small size, low cost , standard rail mounting DIN35mm
● Three-port isolation (input, output, power supply and mutual isolation between channels)
● High accuracy (0.1% F.S, 0.2% F.S)
● High linearity (0.1% F.S)
● High isolation voltage (2500VDC/60S)
● Low temperature drift (35PPM / ℃)
● industrial temperature range (-45 ~ +85 ℃)
● product performance and reliable (MTBF> 50 Wan hour)
● 5VDC/12VDC/15VDC/24VDC other options
● International standard signal select input and output (4-20mA/0-20mA/0-10mA/0-10V/0-5V/1-5V)
● two -wire signal input 
● products passed the EU CE certification
● passed Rohs environmental certification
● Product size : 94x21.83x47mm

Application:
● DC current / voltage signal isolation , conversion and amplification
● industrial field signal isolation and long distance transmission without distortion
● Analog signal ground interference suppression and analog isolation , acquisition, conversion , and remote
● analog two -wire 4 ~ 20mA sensor signal isolation , transformation and remote
● instrumentation and sensor signal transceiver
● power isolation monitoring industrial site
● power monitoring , medical equipment isolation barrier
● overcome the interference between various devices

Distribution isolator Selection example :

Example 1: Signal input :4-20mA; signal output :0-10V; isolation Distribution : 24VDC; Working power : 12VDC; Product Type : DIN35 1x1 MI-V1-P3-VO5-2S

Example 2: Signal Input :4-20mA; signal output :4-20mA; isolation Distribution : 24VDC; Operating Power : 24VDC; Product Type : DIN35 1x1 MI-I4-P1-IO1-2S